Launch X431 V 8 inch Table Special Function

Launch X431 V 8'' Lenovo Tablet PC can replace X-431 V WiFi/Bluetooth and with 2 years free update on the official site. It communicates with your car by connecting DBSCAR with Bluetooth. it achieves X431 series full car model and full-system diagnose function. It integrates more application and
service, such as creating maintenance data base and case library, providing instant maintenance information, establishing public and private maintenance social circle etc.Launch X431 Pro

Launch X431 V8 inch Table auto diagnostic tool Special Functions List:

This option allows you to detect whether the system parameters are normal or
not. It mainly includes: Injector test, fuel pump test, purge control solenoid and so on. OBD2
Take “1# injector” as an example.
To detect whether 1# injector works normally or not, tap “1# injector”, the

system will automatically carry out the function. After complete, a prompt

dialog box will pop up on the screen.

1.Reset Service
2.Oil Reset Service
3.Steering Angle Calibration
4.Electronic Parking Brake Reset
5.Electronic Throttle Position Reset/Learn
6.Battery Register/Battery Maintenance
7.ABS Bleeding
8.Tire Pressure Monitor System Reset
9.Diesel Particulate Filer(DPF) Regeneration

More information pls visit:http://www.uobdii.com/wholesale/launch-x431-v-8-inch-tablet-wifi-bluetooth-diagnostic-tool.html

Article from Launch X431 Scanner tool blog: http://launchx431scantool.blogspot.com/

El-50448 GM TPMS Reset tool feedbacks

Here a collection of El-50448 GM TPMS relearn tool good feedbacks. Thanks to the real users’ contribution.

works on truck and car: Simple and inexpensive but works great. Much better than going to the dealer or a tire store just to get your pressure sensors reset. I used it on my truck and my wife’s car and it only took a few minutes to reset all four wheels on each.

Well worth the money.

with correct low battery display: I’ve never been able to get my TP sensors to program using the “let air out” method on my 2007 Tahoe. Before I had this tool, I would just remember which tires were which when I rotated them, but no longer. Now, I can reprogram them in just a few seconds and the dash display correctly indicates which tire is low. This tool should have come with the vehicle.

Easy to use: The operation of this product is simple and straightforward. As stated it’s hard to get excited about spending this amount of money just to rotate tires, but considering what dealers would charge, it would not take many trips service visits to pay for the unit. As far as working it does exactly what it says it will do with no drama. Put the vehicle in reset mode and push the button on the unit following directions outlined in the car owners manual.

I could not believe I needed a special tool to rotate my tires. From what I understand 2010 (2011?) and older vehicles, you can use any big magnet to reset your Tire Pressure Sensors. 2011 (2012?) and up to at least my 2013 Silverado, you need one of these gizmos. This one works like a champ, and is the one I found referenced through a GM website.

It is a simple process:
1) Put your key in the ignition, and turn it to run.
2) Press your lock and unlock buttons on your remote until the truck chirps. (There are a few other ways too, but this was easiest).
3) Start with the left front tire; the blinker light for that tire should light up to let you know which tire needs programming. Cool right?
4) Put this gizmo to the tire next to the stem, and press the button. After 3 seconds or so, the truck chirps
4) Then the front right blinker is on, and thats your next tire. Press the gizmo to the tire and press the button. Continue on to the rear right, and finish with the rear left. All the while following the blinker. Takes all of 3 minutes.
On one hand $50+ is a lot to ensure my tire pressure sensors are all aligned properly (I rarely look at them. On the other hand, I have a new tool and no strangers need to touch my truck.

Wide GM vehicle coverage: The deflate method is verified ok only on Chevrolet Volt 2011 year, with the El-50448 TPMS relearn tool, I could get the 4 TPMS programmed in less than one minute. El-50448 could program TPMS on GM 2010-2013 year.

you can find the tool at any GM dealership, or buy it off online e.g www.uobdii.com. I have a link here: www.uobdii.com/wholesale/el-50448-tpms-activation-tool-oec-t5.html. El-50448 TPMS relearn tool price is 50usd by Paypal with delivery (15-20 working days) and pay more shipping fee; you could receive the package in 3-5 working days by DHL. PS: when you receive the package you can find it includes not charger and battery, if you need them, you need pay additional 10 usd.

Here all GM models El-50448 TPMS relearn tool test ok on:
2010 9-5
2010 Acadia, Enclave, OUTLOOK, Traverse (VIN R/V)
2010 Allure, LaCrosse (VIN G)
2010 Antara, Captiva, Terrain, Winstorm
2010 Avalanche, Escalade, Suburban, Tahoe, Yukon (VIN C/K)
2010 Aveo, G3, Barina (VIN S/T)
2010 Buick Excelle
2010 Buick Regal (China)
2010 Camaro (VIN F)
2010 Canyon, Colorado (VIN S/T)
2010 Cobalt, G5 (VIN A)
2010 Corvette (VIN Y)
2010 Cruze (China)
2010 Cruze
2010 CTS (VIN D)
2010 Daewoo Lacetti
2010 DTS (VIN K)
2010 Equinox, Terrain (VIN L) Xhorse Tool
2010 Express, Savana (VIN G/H) XTool
2010 G6 (VIN Z) Launch X431
2010 H3/H3T (VIN N)
2010 HHR (VIN A)
2010 Impala (VIN W)
2010 Insignia
2010 LaCrosse (China)
2010 Lucerne (VIN H)
2010 Malibu (VIN Z)
2010 Opel/Vauxhall Astra
2010 Sierra, Silverado (VIN C/K)
2010 SKY, Solstice (VIN M)
2010 SRX (VIN N)
2010 STS (VIN D)
2010 VE/WM – Sedan, Sportwagon, Ute, Lumina, Caprice, HSV
2010 VUE (VIN Z), Captiva Sport
2011 Acadia, Enclave, Traverse (VIN R/V)
2011 Alpheon
2011 Antara, Captiva
2011 Astra
2011 Avalanche, Escalade, Suburban, Tahoe, Yukon (VIN C/K)
2011 Aveo, Barina (VIN S/T)
2011 Buick Excelle
2011 Buick Regal (China)
2011 Camaro (VIN F)
2011 Canyon, Colorado (VIN S/T)
2011 Caprice PPV
2011 Captiva Sport
2011 Corvette (VIN Y)
2011 Cruze
2011 CTS (VIN D)
2011 DTS (VIN K)
2011 Equinox, Terrain (VIN L)
2011 Express, Savana (VIN G/H)
2011 HHR (VIN A)
2011 Impala (VIN W)
2011 Insignia
2011 LaCrosse (China)
2011 Lucerne (VIN H)
2011 Malibu (VIN Z)
2011 Orlando
2011 Regal (VIN G)
2011 Sierra, Silverado (VIN C/K)
2011 SRX (VIN N)
2011 STS (VIN D)
2011 VE/WM – Sedan, Ute, Sportwagon, Caprice, Lumina, Omega, VXR8
2011 Volt
2012 Acadia, Enclave, Traverse (VIN R/V)
2012 Alpheon (2706)
2012 Ampera, Volt (VIN R) (Europe)
2012 Antara, Captiva
2012 Astra-J (2857)
2012 Avalanche, Escalade, Suburban, Tahoe, Yukon (VIN C/K)
2012 Aveo Classic, Barina Classic (VIN T)
2012 Aveo, Sonic (2777)
2012 Barina (2774)
2012 Buick Excelle (2861)
2012 Camaro (VIN F)
2012 Canyon, Colorado (VIN S/T)
2012 Caprice PPV
2012 Captiva Sport
2012 Chevrolet Cobalt (2809)
2012 Colorado (Other IO), S10 (South America)
2012 Corvette (VIN Y)
2012 Cruze (2863)
2012 CTS (VIN D)
2012 Equinox, Terrain (VIN L)
2012 Express, Savana (VIN G/H)
2012 Impala (VIN W)
2012 Insignia (2707)
2012 LaCrosse (China) (2710)
2012 LaCrosse (VIN G) (2709)
2012 Malibu (VIN Z)
2012 Opel Combo-D
2012 Optra, Viva (VIN J)
2012 Orlando (2859)
2012 Regal (China) (2711)
2012 Regal (VIN G) (2708)
2012 Sierra, Silverado (VIN C/K)
2012 Sonic (US/Canada) (2775)
2012 SRX (VIN N)
2012 VE/WM – Sedan, Ute, Sportwagon, Caprice, Lumina, VXR8
2012 Verano (US/Canada) (2816)
2012 Volt (VIN R)
2012 Zafira-C (2860)
2013 Acadia, Enclave, Traverse (VIN R/V) (3206)
2013 Alpheon (3094)
2013 Ampera, Volt (VIN R) (Europe) (3211)
2013 Antara, Captiva (5376555)
2013 Astra-J Convertible/Coupe (5376567)
2013 Astra-J (5376577)
2013 ATS (VIN A) (3086)
2013 Avalanche, Escalade, Suburban, Tahoe, Yukon (VIN C/K) (3088)
2013 Aveo, Sonic (Africa, Middle East, AP, South America, CKD, Mexico) (5376711)
2013 Aveo, Sonic (Europe) (5376704)
2013 Barina (5376837)
2013 Camaro (VIN F) (3106)
2013 Caprice PPV (3105)
2013 Captiva Sport (3101)
2013 Cobalt (3107)
2013 Colorado, Colorado 7, S10, Trailblazer (5392270)
2013 Combo-D
2013 Corvette (VIN Y) (3104)
2013 Cruze (Global) (5377099)
2013 CTS (VIN D) (3085)
2013 Encore (China) (5377162)
2013 Encore, Trax (North America) (5377181)
2013 Equinox, Terrain (VIN L) (3100)
2013 Excelle (5377155)
2013 Express, Savana (VIN G/H) (3103)
2013 Impala (VIN W) (3102)
2013 Insignia (3098)
2013 LaCrosse (China) (3095)
2013 LaCrosse (VIN G) (North America) (3090)
2013 Malibu (China) (3096)
2013 Malibu (Europe, Other IO and South America) (2713)
2013 Malibu (North America) (3093)
2013 Mokka, Trax, Tracker (Europe) (5377179)
2013 Onix (3166)
2013 Orlando (Global) (5377530)
2013 Regal (China) (3099)
2013 Regal (VIN G) (North America) (3089)
2013 Sierra, Silverado (VIN C/K) (3087)
2013 Sonic (US/Canada) (5377994)
2013 Spark (US/Canada), Barina Spark (Automatic Transmission) (5421555)
2013 Spin
2013 SRX (VIN N) (3201)
2013 Trax, Tracker (Africa, Australia, Middle East, South America) (5377156)
2013 VE/WM Ute, Caprice, Lumina
2013 Verano (US/Canada) (5377996)
2013 Volt (VIN R) (North America, Holden) (3210)
2013 XTS (China) (3092)
2013 XTS (North America) (3091)
2013 Zafira-Tourer Auto Repair
Here couples of El-50448 TPMS relearn tool pictures:
el-50448-tpms-activation-tool-oec-t5-new-1

Launch X431 V 8inch Tablet registration

Launch X431 V 8inch Tablet Wifi Bluetooth scanner registration is needed, though it is able to directly use without activation by sending country and language to Launch Company and wait 2 working days. Following the steps as below, it is easy to do.China OBD2</strong>

During initial use, tap the X-431 V icon on the home screen and you will see some illustrations that guide you through some of important operations of the application. Scroll your screen to left to read it until the “Start Now” page appears. Tap “Start now” to enter the main menu screen.

Launch X431 V 8inch Tablet user registration
Tap “Login” on the upper right corner of the main menu screen:

If you are a new user, tap “New Registration”.
Launch X431
Xhorse Tool
XTool


Note: To obtain better service, you need to provide real information. Fill in the information in each field (Items with * must be filled). After inputting, tap “Register”, a screen similar to the following will appear as below, input the Serial Number and Activation Code, which can be found in the password envelope.

Note: To exit and activate it later, tap “Skip”. In this case, you can activate your connector by tapping “Activate Connector” in “Profile”. Tap “Activate” to finish your registration.

To download the diagnostic software, tap “Yes”.
Tap “No” to download and install it later.

Tap “Update” to start downloading. It may take several minutes to finish it, please be patient to wait. To pause downloading, tap “Pause”. To resume it, tap “Continue”. Once download is complete, the system will install the software package automatically.Car Repair

If you have registered to be a member, input your name and password, and then tap the “Login” button to enter the main menu screen directly.

Article from:
How to register Launch X431 V 8inch Tablet Wifi Bluetooth scanner?

How to retract BMW E90 E-brake by Foxwell NT510

Have used Foxwell NT510 hand-held scanner to retract BMW E90 E-brake pads. It cannot be more easier, i think. Much more convenient compared with K+DCAN cable. No need a laptop for running INPA software.OBD2 Tool

Here is what i did.

There is much more other stuff added with NT510 scanner. But this is the most important. I was surprised there is an ignition coil re-calibration (LVS) function when change coils. Interesting! I applied NT510 scanner when i saw it as i was running the new BMW OEM Eldor coils. POBD2

Article from:Foxwell NT510 retract E-brake pads on BMW E90

Launch CR9081 DIY Scanner Functions List

Launch CReader 9081 is a small car maintenance tool integrating OBD diagnostic functions with 11 reset functions. It has a 4.0-inch color display and provides quick diagnosis for over 46 European, American, and Asian mainstream car models

Launch CR9801 Scanner function list:
1. OBD full functions
Read dynamic data streams and MIL
Read readiness status
Query freeze frame data
Read current DTCs
Clear DTCs
O2 sensor test
On-board monitor test
Read pending DTCs
On-board system or component control
Read vehicle information
Read permanent DTCs
2. Oil reset
3. EPB reset
4. BMS reset
5. SAS reset
6. DPF reset
7. TPMS reset
8. Throttle matching
9. ABS brake bleeding
10. Tooth learning
11. Anti-theft matching
12. Injector programming
13. Query DTCs
14. PC internet update
15. Multilingual support
16. Print data via PC

More informaiton about Launch CR9801:http://www.uobdii.com/wholesale/launch-creader-9081-diy-scanner-with-special-functions.html

Autel Maxidas DS808 Auto Diangostic Tool Auto Update

The Auto Update allows the Autel Maxidas DS808 to automatically update the OS, the MaxiDAS system, and the Vehicle. All you need to do is to switch ON by tapping the button on the right side of each and set the desired automatic update time.

To set auto system or vehicle update

1. Tap the Settings application on the MaxiDAS Job Menu.car tool

2. Tap the Auto Update option on the left column. The three auto update items list on the right.

3. Switch the ON the button on the right of item that you want to auto update.

4. Tap on the time to set time, you can use the + and – button or tap on the numbers then the manual input screen will pop up. Tap Done to complete the time setting.

More information about DS808 pls visit: www.uobdii.com/wholesale/autel-maxidas-ds808.html

SEC-E9 Key Cutting Machine cut Chevy DWO4 car key+ Schlage home key

Do you want a key machine to cut both car key and home key? SEC-E9 Key Cutting Machine can do it! Check below to know how SEC-E9 cut Chevrolet DWO4 key and Schlage key for door lock!
Part 1: How SEC-E9 cut Chevrolet/ Buick DW04 key blade?
Click the search button on main menu.
sec-e9-key-cutting-machine-cut-chevy-dw04-1
Enter “DWO4” then click search icon.
sec-e9-key-cutting-machine-cut-chevy-dw04-2
Choose “SILCA”→ “DWO4 (74) (8, 10)”
Choose correct space. In this case it is 8.

Click “Menu” then “Info” at bottom bar to get key blank information.
Click “Decode”, follow the screen guide, use stopper to put the original key correctly on clamp.

Click “Decode” to start decoding.
sec-e9-key-cutting-machine-cut-chevy-dw04-7
After that put the new Chevy DWO4R key blank on clamp, click “Cut” then set cutting speed.
Key cutting complete, test new key blank working!

Part 2: How to cut Schlage key by SEC-E9 CNC Automatic Key Cutting Machine?
Click “Standard” button on main menu.

Choose “Schlage” and “All Schlage”.

Click “Decode” and pay attention to screen guide to fix the clamp correctly.
sec-e9-key-cutting-machine-cut-schlage-home-key-6 sec-e9-key-cutting-machine-cut-schlage-home-key-5
Put the original Schlage key to decode.
Then replace the new blank key blade to cut.
New Schlage key cutting finish!

Get SEC-E9 Key Cutting Machine $2,399 for car key and home key at uobdii.com!
www.uobdii.com/wholesale/sec-e9-cnc-automated-key-cutting-machine.html

Article from: SEC-E9 Key Cutting Machine cut Chevy DWO4 car key+ Schlage home key

OBDSTAR DP PAD Tablet Immobilizer function list

OBDSTAR DP PAD is the special tablet of OBDSTAR, which supplies a comprehensive diagnostic scheme for Japanese and Korean vehicles.

OBDSTAR DP PAD Function List:
Read and clear fault codes;
Clear key memory;
Program keys, proximity keys, smart key, flip keys;
Program after-market and OEM keys;
Display live data;
Component actuation; car tool
Read keys from immobilizer memory
New ECU programming;
New mechanical key number programming;
Vehicle identification key programming;
Reset ECU& Reset immobilizer;
New remote controller programming;
Immo PINCODE reader;
Mileage adjustment via OBD;
With full and strong database for the most important vehicle makes;
VCI diagnose
One key upgrade via wifi
Remote assistance
Report center
EEPROM chip read and immobilizer initialization;
EPB(Electric park brake);
Oil/Service reset;
Battery matching;
ABS
TPS
SRS reset
TPMS(low tire)reset
Steering angle reset
CVT learning/Value reset
EEPROM/PIC adapter
OBDII
Diagnosis

More information about OBDSTAR DP PAD,pls visit:http://www.uobdii.com/wholesale/obdstar-dp-pad-tablet.html

Article form OBDSTAR TOOL BLOG:http://obdstartool.blogspot.com/2017/02/newobdstar-dp-pad-tablet-immobilizer.html

ETKA Electronic Catalogue V7.5 install guide on 32bit Windows 7/Windows 8.1

ETKA Electronic Catalogue V7.5 runs ok on all systems based on X86 32 bits, especially on Windows 7 pro and Windows 8.1 pro 32bit. This is a customer solution of ETKA installation on 32 bit system.

DISABLE ALL ANTIVIRUS SOFTWARE
RUN ALL COMMANDS FROM – “Run as Administrator”.
1.- Install “install-hardlock.exe”.
–> First installer, choose “English” option and installed.
–> Second installer, choose your language and installed. (only for Windows 7, 8, 10 systems. Others systems cancel installation)
–> This installer, create “Emulator” shortcut on Windows 7 (only?) desktop.
2.- Install “install-fix.exe”.
3.- Install “etka75setup.exe” (default install on C:\ not possible to modify).
4.- Open as administrator desktop shorcut created on step 1. “Emulator” and click on “ACTIVATE”
—> Emulator Installed and Started successfully (its OKEY MESSAGE).
5.- Reboot system.
.
6.- Copy all shortcuts in “desktop shortcut” + Make shortcuts for Data.exe and Prices.exe if you wish and place on your desktop.
7.- Place Folder “C:\ETKA” + File “Data.exe” in Antivirus – Malwarebytes Exclusions (Malwarebytes treats this file {Data.exe} as a Trojan and deletes it).
8.- Re-enable Malwarebytes protections.
9.- Open “ETKA 7.5” and that it works OK!..
10.- Replace INI files (9 files??) with corrected versions.
I’VE CORRECTED THESE FILES TO REFLECT MY COUNTRY, LANGUAGE AND CURRENCY WITH “NOTEPAD”. YOU CAN DO THIS IF YOU LIKE.
11.- Run “Error 3 (32 BIT)” file.
12.- Run C:\ETKA\VWAU\RosyVisionControl\registerControl .Net v4.0.bat.
13.- Reboot system…
14.- Open “Prices.exe” – Click on “Change” and choose your price zone. Click on “Search” and “Start ETKA” for installed prices.
15.- Open “Data.exe” – Click on “Search” and wait to download news updates. Click on “Start ETKA” for installed updates.
16.- Check program operation.
17.- Enjoy etka 7.5.
(BIG THANKS to @pbrotea in the CT community)

How to install VW ETKA 7.5 on 32bit Windows 7/Windows 8.1

El-50448 GM TPMS relearn tool customers feedbacks

Here a collection of El-50448 GM TPMS relearn tool good feedbacks. Thanks to the real users’ contribution.

works on truck and car: Simple and inexpensive but works great. Much better than going to the dealer or a tire store just to get your pressure sensors reset. I used it on my truck and my wife’s car and it only took a few minutes to reset all four wheels on each.

Well worth the money.

with correct low battery display: I’ve never been able to get my TP sensors to program using the “let air out” method on my 2007 Tahoe. Before I had this tool, I would just remember which tires were which when I rotated them, but no longer. Now, I can reprogram them in just a few seconds and the dash display correctly indicates which tire is low. This tool should have come with the vehicle.

Easy to use: The operation of this product is simple and straightforward. As stated it’s hard to get excited about spending this amount of money just to rotate tires, but considering what dealers would charge, it would not take many trips service visits to pay for the unit. As far as working it does exactly what it says it will do with no drama. Put the vehicle in reset mode and push the button on the unit following directions outlined in the car owners manual.

I could not believe I needed a special tool to rotate my tires. From what I understand 2010 (2011?) and older vehicles, you can use any big magnet to reset your Tire Pressure Sensors. 2011 (2012?) and up to at least my 2013 Silverado, you need one of these gizmos. This one works like a champ, and is the one I found referenced through a GM website.

It is a simple process:
1) Put your key in the ignition, and turn it to run.
2) Press your lock and unlock buttons on your remote until the truck chirps. (There are a few other ways too, but this was easiest).
3) Start with the left front tire; the blinker light for that tire should light up to let you know which tire needs programming. Cool right?
4) Put this gizmo to the tire next to the stem, and press the button. After 3 seconds or so, the truck chirps
4) Then the front right blinker is on, and thats your next tire. Press the gizmo to the tire and press the button. Continue on to the rear right, and finish with the rear left. All the while following the blinker. Takes all of 3 minutes.
On one hand $50+ is a lot to ensure my tire pressure sensors are all aligned properly (I rarely look at them. On the other hand, I have a new tool and no strangers need to touch my truck.

Wide GM vehicle coverage: The deflate method is verified ok only on Chevrolet Volt 2011 year, with the El-50448 TPMS relearn tool, I could get the 4 TPMS programmed in less than one minute. El-50448 could program TPMS on GM 2010-2013 year.

you can find the tool at any GM dealership, or buy it off online e.g www.uobdii.com. I have a link here: www.uobdii.com/wholesale/el-50448-tpms-activation-tool-oec-t5.html.

El-50448 GM TPMS relearn tool price is 50usd by Paypal with delivery (15-20 working days) and pay more shipping fee; you could receive the package in 3-5 working days by DHL. PS: when you receive the package you can find it includes not charger and battery, if you need them, you need pay additional 10 usd.

More information about TPMS Activation tools: 
www.uobdii.com/wholesale/producttags/tpms-tool.html