Toyota Hilux G Chip Immo Reset via Obdstar Key Master

Here is a tutorial on how to use OBDSTAR X300 Pro3 key master to reset a G chip key for 2010 Toyota Hilux Vigo when all key lost.

 

Model: Toyota Hilux Vigo 2010

Key type: G chip (72)

Auto key programmer: obdstar key master

Purpose: Reset immobilizer when all key lost

 

This is the Toyota G chip key, G stamped on the key

obdstar-key-master-reset-immo-g-chip-for-Toyota-Vigo-(1)

Using Toyota/Lexus software v31.09

obdstar-key-master-reset-immo-g-chip-for-Toyota-Vigo-(2)

Now all key lost

When insert the key, the security light is not off

obdstar-key-master-reset-immo-g-chip-for-Toyota-Vigo-(3)

Turn on with the new key

obdstar-key-master-reset-immo-g-chip-for-Toyota-Vigo-(4)

Go to the key master with Toyota/Lexus v31.09

Loading…

Initializing…

Authorizing…

Select Immobiliser-> Type 2 (with G 72)-> Reset immobilizer (all key lost)

obdstar-key-master-reset-immo-g-chip-for-Toyota-Vigo-(5)

obdstar-key-master-reset-immo-g-chip-for-Toyota-Vigo-(6)

obdstar-key-master-reset-immo-g-chip-for-Toyota-Vigo-(7)

Switch ignition off, then enter

Switch ignition on, then enter

Switch ignition off and remove the key

obdstar-key-master-reset-immo-g-chip-for-Toyota-Vigo-(8)

Configuring the system…

Switch ignition on, then enter

Configuring the system…

The security light now turns on for steady prompt

obdstar-key-master-reset-immo-g-chip-for-Toyota-Vigo-(9)

Switch ignition off and remove the key

Prompt in x300 pro3 key master:

For make 1 key only, turn on with the new key for 5 seconds, then turn on/off for 5 times until the security light goes off

obdstar-key-master-reset-immo-g-chip-for-Toyota-Vigo-(10)

obdstar-key-master-reset-immo-g-chip-for-Toyota-Vigo-(11)

obdstar-key-master-reset-immo-g-chip-for-Toyota-Vigo-(12)

obdstar-key-master-reset-immo-g-chip-for-Toyota-Vigo-(13)

obdstar-key-master-reset-immo-g-chip-for-Toyota-Vigo-(14)

obdstar-key-master-reset-immo-g-chip-for-Toyota-Vigo-(15)

obdstar-key-master-reset-immo-g-chip-for-Toyota-Vigo-(16)

obdstar-key-master-reset-immo-g-chip-for-Toyota-Vigo-(17)

Turn on with the key

Now the car can start

obdstar-key-master-reset-immo-g-chip-for-Toyota-Vigo-(18)

Successfully reset Toyota G chip with obdstar x300 pro3 key programmer.


http://obdstar.blogspot.com/2016/12/Reset-Toyota-Hilux-G-Chip-Immo-by-OBDSTAR-Key-Master.html

How to Program Toyota G Key All Keys Lost by OBDSTAR X300DP

Breaking news!!! OBDSTAR X300 DP and X300 Pro3 Key Master key programmers newly updated Toyota G key programming function when all keys lost via OBDII directly. Do not need eeprom adapter. Do not need remove ECU! Here we test 2013 toyota RAV4 all key lost with G chip by OBDSTAR X300 DP successfully.

 

 

Prepared two keys to do all key lost, the left master, the right one with a G chip to be programmed

obdstar-x300-dp-g-chip-all-key-lost-(1)

Power on obdstar X300 DP key programmer tablet

Select Diagnosis in the main menu

obdstar-x300-dp-g-chip-all-key-lost-(2)

In IMMOBILIZER, select Type 2 (with G chip 72)

obdstar-x300-dp-g-chip-all-key-lost-(3)

Communication…

This is the G chip

obdstar-x300-dp-g-chip-all-key-lost-(4)

Select All key lost

obdstar-x300-dp-g-chip-all-key-lost-(5)

Communication…

Switch ignition off

Switch ignition on

Communication…

Switch ignition off and remove the key

obdstar-x300-dp-g-chip-all-key-lost-(6)

Configuring the system, please wait…

Switch ignition on

Configuring the system, please wait…

Switch ignition off and remove the key

The system pops up the tutorial of key programming through Obdstar X300DP:

obdstar-x300-dp-g-chip-all-key-lost-(7)

“program keys as the following steps within 120 seconds:

A: program 2 master keys and 1 sub key

1- program the first master key, turn on the ignition and wait for 5 seconds

2- insert the second master key, turn on the ignition switch and wait for 5 seconds

3- insert the third sub key, turn on the ignition switch and wait for 5 seconds. The security light turns off and programming is finished.

 

B: program 1 master key (here, we should follow this guide)

1- insert the first master key, turn ignition on and wait for 5 seconds

2- insert the second sub key, turn on the ignition switch and wait for 5 seconds

3- turn on the ignition switch quickly for 5 times. The security light turns off and programming is finished.

 

C: program 1 master key:

1- insert the master key, turn on the ignition switch and wait for 5 seconds

2- turn on the ignition switch quickly for 5 times. The security light turns off and programming is finished.”

obdstar-x300-dp-g-chip-all-key-lost-(8)

Obdstar x300 dp key programmer does all key lost with G chip through OBDII successfully!

OBDSTAR X300 DP Program Toyota G Key All Key Lost via OBDII

Program Mazda 3 2015 All Keys Lost by OBDSTAR Key Master

Programming Mazda 3 SkyActive 2015 smart remote keys when all keys lost by using OBDSTAR X300 Pro3 Key Master in action.

 

You need at least 2 remotes to be programmed.

key-master-mazda-3-smart-remote-1

Connect X300 pro3 with vehicle via OBD socket

Select Mazda

Select Mazda 3->Type 3 (2013+)->With Smart

key-master-mazda-3-smart-remote-2

key-master-mazda-3-smart-remote-3

key-master-mazda-3-smart-remote-4

Select All smart keys lost

key-master-mazda-3-smart-remote-5

minimum 2pcs keys are required. All smart keys will be erased.

key-master-mazda-3-smart-remote-6

switch ignition on, press Start button for twice

Current number of smart keys: 2

key-master-mazda-3-smart-remote-7

OBDSTAR Key Master reading vehicle information

Current number of smart keys: 0

key-master-mazda-3-smart-remote-8
Erase keys complete

switch ignition OFF

switch ignition on

Use a new smart key to contact Start button, pres ENTER to continue

key-master-mazda-3-smart-remote-9

Security light stop fashing
First remote programm OK
Current number of smart keys:1

key-master-mazda-3-smart-remote-10
X300 pro3 prompt whether to program next one? Press Yes to continue
Switch ignition OFF

Switch ignition on

Again use a new smart key to contact Start button, pres ENTER to continue
Program success press enter to program next of not press ESC

key-master-mazda-3-smart-remote-11
You have to complete the following procedure to start engine:
1. Switch ignition off
2.Put on the brakes, turn all the matched keys to the start button to start the engine for 3 seconds, then switch ignition off
In short, use all keys to start engine for 3 seconds

key-master-mazda-3-smart-remote-12

Test all remote function

key-master-mazda-3-smart-remote-13
Success!

http://obdstar.blogspot.com/2016/12/obdstar-x300-pro3-program-mazda-3-2015-all-key-lost.html

OBDSTAR Key Master Program Toyota Estima Remote Key

It is a Japan imported Toyota Estima Hybrid minivan which need to get new remote programmed. Here we use OBDSTAR X300 Pro3 Key Master to program its new remote via OBD.

key-master-toyota-estima-remote-2

Note: The Toyota Previa, also known as the Toyota Estima (エスティマ) in Japan, and Toyota Tarago in Australia, is an MPV or multi-purpose vehicle (known as a minivan in North America) produced by Toyota since 1990.

 

You need 2 remotes, one programmed and one to be programmed

key-master-toyota-estima-remote-1

Precedure:
In OBDSTAR Key Master we select Toyota/Lexus

key-master-toyota-estima-remote-3
Turn igniton ON

Toyota/Lexus V31.05

key-master-toyota-estima-remote-4
Select Smart key system

key-master-toyota-estima-remote-5
Select Type 1

key-master-toyota-estima-remote-6
Select Add smart key

X300 Pro3 has erase, reset smart key and program ECU functions list

Key Master will prompt each procedure has to complete within the sepcificed time

Program new remote to Position 5

key-master-toyota-estima-remote-7
Can program more to 8th Position

key-master-toyota-estima-remote-8
Touch programmed smart to contact Start button
Sound beep

key-master-toyota-estima-remote-9

Use new smart key to contact Start button
Sound beep

Program Success
Turn ignition OFF to test new smartt remote key
Remote OK
Done


http://www.key-programmer.org/2016/12/03/program-toyota-estima-remote-by-obdstar-key-master/

Generate Mitsubishi Triton 2007 Remoter by OBDSTAR

Here is the instruction on programming 2 remote control key on Mitsubishi Triton 2007 by using KD900 remote generator and OBDSTAR X300 Pro3 Key Master key programmer.

 

Vehicle model:

Mitsubishi Triton double cab 2007

mitsubishi-triton-by-key-master-1

Devices required:
KD900 remote maker

OBDSTAR X300 pro

2 remote keys

 

Background info:

The Mitsubishi Triton is a compact pickup truck produced by Mitsubishi. It was originally known as the Mitsubishi Forte in Japan from 1978 to 1986, when the name was discontinued as the pickup was not sold in its home market for a while. It returned to Japan in 1991 as the Strada. For most export markets the name L200 is used, though it also been known as the Rodeo,Colt,Storm, Magnum, L200 Strakar (badge used in Portugal since 1999, Strakar is a portmanteau of Strada and Dakar), and others. Currently the pickup truck is sold in every available Mitsubishi market except the United States, Canada, Japan, P.R.C., and South Korea.

 

Procedure:
Step 1: Generate Remote with KD900

Well connect KD900

Select Generate Remote

mitsubishi-triton-by-key-master-2
Select Mitsubishi->Thailand 433

mitsubishi-triton-by-key-master-3

Detect key information

mitsubishi-triton-by-key-master-4-1

mitsubishi-triton-by-key-master-4

Select Make Remote

mitsubishi-triton-by-key-master-5
Make remote success

mitsubishi-triton-by-key-master-6

Inserted to keyshell

Go back and select Simulate Device in KD900

mitsubishi-triton-by-key-master-7

Step 2: Program remote with Key Master

Connect OBDSTAR Key Master with vehicle via OBD socket

select Add remote

mitsubishi-triton-by-key-master-8

Turn ignition on with remote key
Select Type 1
select L200 Triton ->2010
select L200 Triton
Select from vehicle
Select Mitsubishi region: China-> Select from vehicle
select L200 Triton ->2010

Select Type 1

mitsubishi-triton-by-key-master-9

mitsubishi-triton-by-key-master-10

mitsubishi-triton-by-key-master-11

mitsubishi-triton-by-key-master-12
This Triton key has no chip
Select add remote (add only one remote)
All remotes will be erased

mitsubishi-triton-by-key-master-14
Number of programmed remotes: 0

mitsubishi-triton-by-key-master-15

Orderly press Unlock key of the remote to program 3 times within 30 sec
Then remote number turn to 1

mitsubishi-triton-by-key-master-16

Press down button for twice on KD900

mitsubishi-triton-by-key-master-17

Number of programmed remotes: 2
Program Complete
Test remote.


http://www.key-programmer.org/2016/11/29/generate-2-remote-keys-for-mitsubishi-triton-2007/

Program Remote Smart Key for Suzuki Swift 2013

Here is the step-by-step instruction on program Suzuki Swift 2013 Smart remote key push start without pin code by OBDSTAR X300 Pro3 Key Master key programmer.

We have only 1 key, we need to program a new smart remote.

obdstar-x3300-pro3-suzuki-swift-1

Select Suzuki

obdstar-x3300-pro3-suzuki-swift-2
Select Suzuki V30.06
Select Smart key system

obdstar-x3300-pro3-suzuki-swift-3

Select Alivio

obdstar-x3300-pro3-suzuki-swift-4
Select Program smart key

obdstar-x3300-pro3-suzuki-swift-5
Select Without PIN

obdstar-x3300-pro3-suzuki-swift-6

After performing this function, all keys will be erased.
Press ENTER to continue,press ESC to return
We have only 1 key
Configuring the system,please wait…

All keys will be erased by OBDSTAR Key Master.

Security light goes on for waiting new key

obdstar-x3300-pro3-suzuki-swift-7

Please input current year and month, eg. September 15,2016 and confirm

obdstar-x3300-pro3-suzuki-swift-8

Stick smart key to the start button

obdstar-x3300-pro3-suzuki-swift-9

Press ENTER

Have sound 2 beeps to register key

Security light go off

obdstar-x3300-pro3-suzuki-swift-10
Program success, whether to program next one? Press ENTER to program Next

Program only 1 key, press ESC to exist

Done.

obdstar-x3300-pro3-suzuki-swift-11

Turn ignition off before try to start car with new key


http://obdstar.blogspot.com/2016/11/program-suzuki-swift-2013-remote-key-by-obdstar.html

Read VW Polo security code by OBDSTAR X300 pro3

Just got VW polo pin code by OBDSTAR X300 Pro3 Key Master key programmer via EEPROM/PIC adapter within 2 minutes.

obdstar-key-master-vw-polo-3

Well connect eeprom/pic 2-in-1 adapter. Status indicator on means well connection is built

obdstar-key-master-vw-polo-2

Select EEPROM Adapter function in OBDSTAR Key Master

obdstar-key-master-vw-polo-1

Select PIC/FREESCALE ADAPTER V33-34

obdstar-key-master-vw-polo-4

Select EEPROM

obdstar-key-master-vw-polo-5

Select Read pin code

obdstar-key-master-vw-polo-6

Select vehicle: VW->Polo

obdstar-key-master-vw-polo-7

Select engine ECU type 95040

obdstar-key-master-vw-polo-8

Reading data…
EEPROM dapter Comm (communication) light will flash

Read success. Please eneter the filename to save, i.e POLOPRET

obdstar-key-master-vw-polo-9

Press enter to confirm
The file name of your enter already exists.

obdstar-key-master-vw-polo-10

Read VW Polo security password successfully.


http://obdstar.blogspot.com/2016/11/read-vw-polo-pin-code-by-obdstar-key-master.html

OBDSTAR Key Master Program OPEL Insignia All Keys Lost

Here is the step-by-step instruction on programming key for OPEL Insignia when all keys have lost by using OBDSTAR X300 Pro3 Key Master key programmer.

 

Note: Pin code is required during key programming procedure.

 

Procedure:

Connect X300 Pro3 with vehicle via OBD and power it on
Select vehicle make: Opel

opel-insignia-by-key-master-1

opel-insignia-by-key-master-2

Select Immobilizer

opel-insignia-by-key-master-3

Select from vehicle

opel-insignia-by-key-master-4

Select vehicle model: Insignia

opel-insignia-by-key-master-5

OBDSTAR Key Master has some other Opel models listed:

Aglla 00-08
Astra 95-04
Astra H
Calibra 95-98
Combo 98-
Corsa 95-06
Insignia
Meriva 02-
Movano 98-01
Omega
Sintra 97-98

and more…

Select with or without smart key, here we choose Without Smart

opel-insignia-by-key-master-6
Select All key lost

opel-insignia-by-key-master-7

Enter security code and confirm

opel-insignia-by-key-master-8

Switch ignition off for 5 sec, and then switch ignition on

Configuring the system, please wait for about 10 mins..

Switch ignition off, remove the key

Open and close the driver door, confirm all electrical are closed
Whether to program next key
Switch ignition off, remove the key

opel-insignia-by-key-master-9

Switch ignition off, remove the key
Open and close the driver door, confirm all electrical are closed

Turn on the ignition switch

 

Whether to program next key?
Switch ignition off, remove the key.

 

Configuring the system, please wait for 45 sec…
Turn on the ignition switch
Switch ignition off

Turn on the ignition switch

opel-insignia-by-key-master-10
Program complete.


http://www.key-programmer.org/2016/11/23/program-opel-insignia-all-keys-lost-by-obdstar-x300-pro3/

OBDSTAR Key Master erase and add Toyota Yaris G Key

Here are the instructions on how to erase and add G chip 74 remote key on Toyota Yaris 2015 by OBDSTAR X300 Pro3 Key Master key programmer.

 

Toyota Yaris 2015 CHIP G (74) master key is required.

Select Toyota, Go to Yaris->Immobilizer

Select Type 2 (with G/H)

obdstar-x300-pro3-toyota-yaris-1

 

check G stamp on master key

 

Step 1: Generate Remote by KD900

Make remote by KD900 Remote Maker
obdstar-x300-pro3-toyota-yaris-2

Step 2: Delete all keys

Turn ignition ON with master key

Select Toyota->Type 2 (with G/H)
Select Erase keys

obdstar-x300-pro3-toyota-yaris-3
1 Master key is needed to erase or add other keys

How to identify master key and valet key?
Insert key into ignition switch, if immobilizer light does not flash, that is master key. If
the indicator flashes for 1 sec and then go off, that is valet key.

obdstar-x300-pro3-toyota-yaris-4
This method can erase all keys except the master key which is in the ignition switch.

Note: Each procedure must be completed within the specific time, otherwise, erasing will
fail, press ENTER to continue

obdstar-x300-pro3-toyota-yaris-5

Turn ignition ON with master key

Perform the following operation within 120 sec press ENTER to continue.
1. Remove key from ignition switch

obdstar-x300-pro3-toyota-yaris-6
Remove this master key from ignition switch within 10 sec, press ENTER to continue

Erase key success.

obdstar-x300-pro3-toyota-yaris-7

Step 3: Add Remote Key by OBDSTAR Key Master

Select Add a key

obdstar-x300-pro3-toyota-yaris-8

Turn ignition ON with master key
Insert programmed master key,switch ignition on, press ENTER to continue

obdstar-x300-pro3-toyota-yaris-9

Insert to match the key and keep the ignition switch off and wait until about 60 sec until the
security lights go out and the matching is done.

Insert adding key wait for 1 minutes or until security light go off

obdstar-x300-pro3-toyota-yaris-10
Insert remote key programmed by KD900
Try to start

Success

obdstar-x300-pro3-toyota-yaris-11
Done.


http://obdstar.blogspot.com/2016/11/obdstar-key-master-adds-toyota-yaris-g-remote.html

Mitsubishi EVO10 Smart Remote Key Programming Guide

Here is the instruction on programming Mitsubishi EVO10 smart remote key when all keys lost by using OBDSTAR X300 Pro3 Key Master key programmer.

 

Vehicle model:
Mitsubishi EVOLUTION 10 TWIST START

obdstar-program-mitsubishi-evo10-1

Smart remote twist start
When program take knob off

obdstar-program-mitsubishi-evo10-2
Can insert key

Take valet key install in remote

Select region

obdstar-program-mitsubishi-evo10-3
Select from type

obdstar-program-mitsubishi-evo10-4

Select Type 2(CAN With smart)

obdstar-program-mitsubishi-evo10-5

Turn igntion ON
Pull out the mechanical key from a smart key, put the key back into a smart key, switch ignition on, press ENTER to continue
Already insert key #1
Select All smart keys lost

obdstar-program-mitsubishi-evo10-7
Input security code, i.e 8A02 and then confirm

obdstar-program-mitsubishi-evo10-8
Program success, whether to program next one? If yes, press ENTER to continue
If not, press ESC

Insert next key #2 and turn ignition switch on
Press ENTER to continue
Take key out from ignition first

You will hear beep beep sound
Press smart key lock button 2 times within one minute, will hear a car beep,if you wan to program other smart keyt, re-peat the operation above, press ESC to return

obdstar-program-mitsubishi-evo10-9
Take key out from ignition first
Press LOCK 2 times
sound beep beep

obdstar-program-mitsubishi-evo10-10
Program complete

Unplug OBDSTAR Key Master key programmer

Wait 10 seconds then test remote
Test remote OK


http://obdstar.blogspot.com/2016/11/obdstar-key-master-program-mitsubishi-evo10-key.html